INTERIOR SWITCHES
4-6
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Battery Saver (Automatically turns off the lights)
• To avoid discharging the battery, if the tail lamps are on after the ignition key is
removed, a buzzer will sound to alert the driver when the driver’s door is opened.
The tail lamps will automatically turn off when the door is closed.(With the light
switch on, if the ignition key is removed and all doors are closed, the tail lamps
are off due to the battery saver function. However, if you open a door and turn
the light switch to the “OFF” position and then to the “ON” position, the tail lamps
will stay on after the door is closed.)
• To turn the tail lamps on again, insert the ignition key into the ignition switch.
Or, turn the light switch to the “OFF” position and then to the “ON” position.
LIGHT SWITCH
Head- and tail lights automatically turn
on or off based upon the intensity of the
sunlight analyzed by the automatic light
sensor.
(Headlamps ON)
(Tail lights ON)
All lights are off.
(Automatic light ON)
OFF
AUTO
Side-marker, tail, license plate, fog, and
instrument cluster lamps come on.
Head-, side-marker, tail, license plate,
fog, and instrument cluster lamps
come on.
(Lights OFF)
With the low beam switched on, ad-
just the aiming angle of headlights to
suit the vehicle load.
• To lower the aiming angle, rotate the
switch counter-clockwise.
• To raise the aiming angle, rotate the
switch clockwise.
Headlight Leveling Switch
According to load condition, adjust the
aiming angle of headlights.
NOTE
Q100-04-Interior Switches.p65 2006-10-02, ¿ÀÈÄ 3:06Page 6 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
