March 2015 DocID026304 Rev 3 1/44
AN4488
Application note
Getting started with STM32F4xxxx MCU hardware development
Introduction
This application note is intended for system designers who require an overview of the
hardware implementation of the development board, with focus on features like
• power supply
• package selection
• clock management
• reset control
• boot mode settings
• debug management.
This document shows how to use the high-density high-performance microcontrollers listed
in Table 1, and describes the minimum hardware resources required to develop an
application based on those products.
Detailed reference design schematics are also contained in this document, together with
descriptions of the main components, interfaces and modes.
Table 1. Applicable products
Type Part Number
Microcontrollers
STM32F401xB / STM32F401xC
STM32F401xD / STM32F401xE
STM32F405xx / STM32F407xx
STM32F411xC / STM32F411xE
STM32F415xx / STM32F417xx
STM32F427xx / STM32F429xx
STM32F437xx / STM32F439xx
STM32F446xx
www.st.com
To Next Page
Need help?
General
