Owner’s Manual
38
Change units
Use the [Level: UP] and [Level: DOWN] keys to toggle between USA units and
Metric units. Press [ENTER] to select your option.
HR inputs
See HR Priority in the previous section for details of the choices.
Language
Use the [Level: UP] and [Level: DOWN] keys to view the choices (English,
German, French, Spanish, Italian, Dutch, Japanese). Press [ENTER] to select
your option.
Adjust upper LCD screen contrast
Use the [Level: UP] and [Level: DOWN] keys to increase or decrease the
contrast level of the upper LCD. Press [ENTER] to select your option.
Adjust lower LCD screen contrast
Use the [Level: UP] and [Level: DOWN] keys to increase or decrease the
contrast level of the upper LCD. Press [ENTER] to select your option.
Auto Repeat (Not Used)
3. To exit “CUSTOMIZE”, press the [CLEAR] key.
Machine Status Codes
To view maintenance information such as the run time in hours, number of workouts
and distance, as well a machine type and software revision:
1. Press [Level: UP], [4], [ENTER]. The console will display “MACHINE STATUS”
2. Press [Level: UP] or [Level: DOWN] to scan through the choices to view. Press
[CLEAR] to exit the machine status codes.
The machine status options are as follows:
Machine run time in hours
Display the machine run time in hours. The console will display “RUN HOURS
#####”.
Number of workouts
Display the number of times a workout key has been pressed. The console will
Operation
To Next Page
Loading...
