Owner’s Manual
42
Change Machine
Changes the machine type from StairClimber, StepMill
®
machine, Bike rev B,
Bike rev A or Elliptical. Scroll through the screen until “CHANGE MACHINE”
is displayed. Press (ENTER), then press [Level: UP] or [Level: DOWN] to scan
through the choices. Select the machine type you want by pressing [ENTER].
Reset Data Set Up
Scroll through the screen until “RESET DATA SET UP” is displayed and
press (ENTER). All customized customer settings will be cleared.
NOTE: The Console will need to be reconfigured.
Clear Error Log
Scroll through the screen until “CLEAR ERROR LOG” is displayed and press
(ENTER). The word “DONE” will appear and all accumulated errors in the
Erro Log will be cleared.
Reset Console
Scroll through the screen until “RESET CONSOLE” is displayed and press
(ENTER). Resets all defaults to original manufacturing settings..
NOTE: The Console will need to be reconfigured.
Operation
To Next Page