Step 29. Remove the transfer pump liner,
blades and blade spring as an assembly. Sepa-
rate the blades and spring from the liner.
Fig. 2.26b
Fig. 2.27
Fig. 2.28
Fig. 2.29
19
Step 27. Loosen and remove 7 transfer pump
porting plate screws using a T-10 bit.
Step 28. Lift off the transfer pump porting plate
and remove the sealing ring and o-ring from the
plate. Discard the o-ring but retain the sealing
ring for reuse if it is still serviceable.
To Next Page
Loading...
