Monitor Mounting/Installation Options
M200 Fall Monitor – Setup & User Guide 29
Chair or Bed Footboard/Headboard Mounting
(Optional)
Use the Bed and Chair Wire Clip (BMB-1000) to attach the monitor to
objects
5
/
16
” to 2¼” thick (e.g., the headboard of a bed).
To attach the bracket to the monitor, position the bracket so that one
of the hooks clips over the bottom of one of the rails on the backside
of the monitor. By pulling on the top end of the bracket, it will clip
over the top of the rail. Do the same on the other side of the monitor.
You can then install the monitor as required.
To Next Page
Loading...
