Interfacing with a Nurse Call System
M200 Fall Monitor – Setup & User Guide 31
Nurse Call (NC) Alarms
The Nurse Call plug can be used in all 4 volume settings (1, 2, 3, and
NC). When a Nurse Call jack is plugged in and the monitor’s alarm
volume is set to “NC”, alarms are muted on the monitor locally.
The “NC” volume defaults to a High setting if no Nurse Call plug is
connected.
Note: Refer to the Nurse Call system documentation for details on
cancelling alarms at the Nurse Call station.
Compatibility
The M200 system is compatible with STANLEY Healthcare’s Arial®
system. An adapter (Part# 54031) can be purchased from STANLEY
Healthcare.
To Next Page
Loading...
