Overview
2 M200 Fall Monitor – Setup & User Guide
Overview
The M200 Fall Management System consists of pressure-sensitive
Sensormat pads which detect the presence of a patient/resident, and a
monitor which provides staff with alarm information.
The monitor provides Pad Exit alarms and Confirmation tones.
If the patient/resident exits the bed or chair pad for longer than a
pre-selected number of seconds (0, 1 or 2), the monitor issues visual
and auditory alarms to alert staff that the patient/resident may need
immediate assistance. For the floor pad, the alarm is sounded when
pressure is added to the pad.
If a technical problem prevents the pad from monitoring (e.g., pad or
Nurse Call cable disconnect, low battery condition, etc.), the monitor
issues visual and Confirmation tones to notify staff.
If a Nurse Call system is connected, alarms can be sent to the Nurse Call
station. The staff member, having been alerted that a patient/resident
is exiting the bed or chair, must provide immediate assistance.
All audible alarms can be cancelled by pressing the Reset Button on the
front of the monitor.
To Next Page
Loading...
