Introduction
M200 Fall Monitor – Setup & User Guide 1
Introduction
The STANLEY Healthcare M200 Fall Management System uses a
pressure-sensitive pad to detect the presence of a patient/resident, and
a monitor to notify facility staff in the event of premature departure
from a bed, chair, or toilet seat.
Check Your Shipment
The M200 Fall Monitor package includes:
1 – Monitor with wheelchair clip and built-in bumper
1 – Wall Mount Bracket Kit including 4 anchors and screws,
4 Dual Lock
®
fasteners (Part# WMB-1000)
1 – Battery Compartment Cover (open-window version)
3 – 3V CR123A Lithium Batteries (not rechargeable)
This document (0980-165-000)
Other Components Sold Separately
Sensormat
®
pads – available in the following models:
• 14 day (73030 - Chair; 74030 - Bed)
• 30 day (73000, 73010 - Chair; 74000, 74010 - Bed)
• 45 day (93010 - Chair; 92010 - Bed)
• 90 day (73001, 73011 - Chair; 74001, 74011 - Bed)
• 180 day (93020 - Chair; 92020 - Bed)
• 1 year (93030 - Chair; 92030 - Bed)
Toilet Pad (Part# 75000, 75001)
Commode Pad (Part# 75002)
Floor Pad (Part# 93045)
Seatbelt (Part# 0707-945), Seatbelt Extender (Part# 0707-946)
Wall Mount Bracket Kits (Part# WMB-1000)
Bed and Chair Wire Clip (Part# BMB-1000)
Nurse Call Cable (Part# 0707-569) - grey, 8’, ¼“ mono plug
Remote call button (Part# 0707-566) with Y-splitter (Part#
0440-137)
Battery Compartment Cover (fully-closed version) - (Part#
BDC-1000)
Replacement battery multi-pack (BAT-080)
Power supply (ADP-080)
To Next Page
Loading...
