Audible Alarms and Tones
32 M200 Fall Monitor – Setup & User Guide
Audible Alarms and Tones
Description
Tone or Audible Message
Pad Alarm As selected or custom recording
Monitor’s mode changed
from arming to armed
Positive Confirmation Tone
New pad connection Positive Confirmation Tone
Nurse Call cable connected Positive Confirmation Tone
Voice recording time is over
(more than 15 seconds)
Positive Confirmation Tone
Low battery (Negative Confirmation Tone)
Audible message: Low Battery
Nurse Call cable
disconnected
2 beeps (Negative Confirmation Tone)
Set Hold mode Audible message: Hold mode 30 seconds
Set Suspend mode Audible message: Suspend mode 2 minutes
Delay State Audible message: Alarm Delay is x Second(s)
Delay State Change Audible message: Alarm delay is set to x Second(s)
Acknowledgement
The following website has been used to furnish various audible tones
for the M200 monitor:
http://www.freesfx.co.uk
To Next Page
Loading...
