– 22 –
ENGLISH
7-2. Errors
Determine the nature of the error by the flashing of the lamp or the sound of the
buzzer.
*1 After changing the paper, press the On-line switch.
*2 Press the On-line switch to continue printing; or change the paper and press
the On-line switch.
*3 After clearing the paper jam or remedying another problem, press the On-line
switch.
*4 Printing will resume automatically after some time has elapsed. (Recovery is
automatic after the print head has cooled.)
*5 This is not a recoverable error. Consult dealer for repairs.
Error Description Power lamp On-line lamp Buzzer
Recovery
Conditions
No paper
Paper near end of
roll (when Near End
Stop is operative)
Mechanical error
(other than cutter
error)
Cutter error (on
models with cutter
only)
Print-order overload
error
RAM R/W error
CPU error
Flashes at 1-
second intervals
Flashes at 2-
second intervals
Flashes at 0.25-
second intervals
Flashes at 0.125-
second intervals
Flashes at 0.5-
second intervals
Off
Off
Off
Off
On (after on-line
switch pushed)
Off
Off
On
On
Flashes at 0.25-
second intervals
*1
*2
*3
*3
*4
*5
*5
4 short beeps
(0.13 seconds)
repeated twice
None
One short (0.13
sec.) and one long
(0.5 sec.) beep
Two short (0.13
sec.) and one long
(0.5 sec.) beep
None
None
Sounds for 2
seconds
To Next Page
Loading...
Need help?
General
