– 31 –
ENGLISH
8-1-6.Auto Cutter Control (SP2500 type only)
Control Codes Hexadecimal Codes Function
<ESC> “d” “0” 1B 64 30
Full-cut command to the auto cutter
<ESC> “d” <0> 1B 64 00
<ESC> “d” “1” 1B 64 31
Partial-cut command to the auto cutter
<ESC> “d” <1> 1B 64 01
<ESC> “d” “2” 1B 64 32 Full-cut command to the auto cutter after paper
<ESC> “d” <2> 1B 64 02 feed
<ESC> “d” “3” 1B 64 33 Partial-cut command to the auto cutter after paper
<ESC> “d” <3> 1B 64 03 feed
8-1-7.Commands to Set the Page Format
Control Codes Hexadecimal Codes Function
<ESC> “C” n 1B 43 n Set page length in lines
<ESC> “C” <0> n 1B 43 00 n Set page length in inches
<ESC> “N” n 1B 4E n Set bottom margin
<ESC> “O” 1B 4F Cancel bottom margin (Default)
8-1-8.Other Commands
Control Codes Hexadecimal Codes Function
<CAN> 18 Cancels printer buffer & Initialize printer
<DC3> 13 Deselects printer
<DC1> 11 Sets select mode (Default)
<RS> 1E Beeps the buzzer
<ESC> “#N, n1 n2 n3 n4”
1B 23 N 2C n1 n2
<LF> <NUL>
n3 n4 Sets memory switch
0A 00
<ESC> “@” 1B 40 Initialize printer
<EOT> 04 Transmits EOT status
<ENQ> 05 Transmits ENQ status
<ETB> 17 Confirms finish of printing
<ESC> <ACK> <S0> IB 06 01 Transmits automatic status
<ESC> <RS> “a” n IB IE 61 n Enables/disables automatic status
<ESC> “?” <LF> <NUL> 1B 3F 0A 00 Resets printer hardware and produce a test print
To Next Page
Loading...
