Star Micronics SP2000 - Print Position Control

– 29 –
ENGLISH
8-1-2.Print Position Control
Control Codes Hexadecimal Codes Function
<LF> 0A Line feed
<VT> 0B Vertical tab
<FF> 0C Form feed
<CR> 0D Carriage Return
<ESC> “a” n 1B 61 n Feeds paper n lines
<HT> 09 Horizontal tab
<ESC> “A” n 1B 41 n Defines n/72-inch line spacing
<ESC> “2” 1B 32 Sets n/72-inch line spacing
<ESC> “z” “0” 1B 7A 30
Sets line spacing to 1/12-inch
<ESC> “z” <0> 1B 7A 00
<ESC> “z” “1” 1B 7A 31
Sets line spacing to 1/6-inch (Default)
<ESC> “z” <1> 1B 7A 01
<ESC> “0” 1B 30 Sets line spacing to 1/8-inch
<ESC> “1” 1B 31 Sets line spacing to 7/72-inch
<ESC> “J” n 1B 4A n One time n/72-inch feed
<ESC> “3” n 1B 33 n Sets line spacing to n/216-inch approximately
<ESC> “y” 1B 79 n Sets line spacing to n/144-inch
<ESC> “D” n1 n2 ... <0> 1B 44 n1 n2 ... 00 Sets horizontal tab stops
<ESC> “l” n 1B 6C n Sets left margin
<ESC> “Q” n 1B 51 n Sets right margin
<ESC> <GS> “a” “0” 1B 1D 61 30
Left justification (Default)
<ESC> <GS> “a” <0> 1B 1D 61 00
<ESC> <GS> “a” “1” 1B 1D 61 31
Centering
<ESC> <GS> “a” <1> 1B 1D 61 01
<ESC> <GS> “a” “2” 1B 1D 61 32
Right justification
<ESC> <GS> “a” <2> 1B 1D 61 02
<ESC> “B” n1 n2 ... <0> 1B 42 n1 n2 ... 00 Set vertical tab stops