To Next Page

To Previous Page

– 32 –

ENGLISH

8-2. ESC/POS Mode Commands

The following table lists the TM-U200 and TM-U300 emulation commands that

are supported by this printer.

Control Codes Hexadecimal Codes Function

TM- TM-

U200 U300

<HT> 09 Horizontal tab ⁄⁄

<LF> 0A Line feed ⁄⁄

<CR> 0D Prints and carriage return ⁄⁄

<DLE> <EOT> 10 04 Enables real-time status send ⁄

<DLE> <ENQ> 10 05 Real-time request to printer ⁄

<ESC> SP 1B 20

Sets size of space to right of character

⁄⁄

<ESC> ! 1B 21 Enables batch print mode ⁄⁄

<ESC> # 1B 23 Sets memory switch

<ESC> % 1B 25

Enables/disables download

⁄⁄

character set

<ESC> & 1B 26 Defines download character ⁄⁄

<ESC> * 1B 2A Selects bit image mode ⁄⁄

<ESC> “–” 1B 2D Selects/cancels underlining ⁄⁄

<ESC> 2 1B 32 Selects 1/6-inch line spacing ⁄⁄

<ESC> 3 1B 33 Selects n/144-inch line spacing ⁄⁄

<ESC> = 1B 3D Selects peripheral device ⁄

<ESC> ? 1B 3F Cancels download character ⁄⁄

<ESC> @ 1B 40 Initializes the printer ⁄⁄

<ESC> D 1B 44 Sets horizontal tab position ⁄⁄

<ESC> E 1B 45 Enables/disables emphasized mode ⁄⁄

<ESC> G 1B 47

Enables/disables double-strike mode

⁄⁄

<ESC> J 1B 4A Prints and n/144-inch paper feed ⁄⁄

<ESC> K 1B 4B

Prints and n/144-inch reverse paper feed

⁄⁄

Star Micronics SP2000 User Manual

Other manuals for Star Micronics SP2000