59
MENU 2 2. —
2. 0
Door closing speed
adjustment
2.0
Press and hold SET button for about 6 seconds to
enter main menu until “0.-” appears on the display
then release the button.
Press UP till “2.-” appears on the display.
Press “SET” into the operating parameter setting
menu, digital displays “2.0”
Press SET to enter the door closing speed adjust-
ment menu,
. 1
High speed, 100% of standard door closing
speed, 50% of soft closing speed
. 2
Medium speed, 90% standard door closing speed,
40% of soft closing speed
. 3
Low speed, 80% standard door closing speed,
40% of soft closing speed
. 4
Low speed, 70% standard door closing speed,
35% of soft closing speed
. 5
Low speed, 60% standard door closing speed,
35% of soft closing speed
. 6
Low speed, 50% standard door closing speed,
35% of soft closing speed
Note:
After quick setting the door drive,AAS function au-
tomatically select the most optimized speed for the
door already. When you change the speed manual
-
ly in this menu, you have to set the travel position
limit again to ensure door drive works properly.
2. 1
Door opening speed
adjustment
2. 1
Press and hold SET button for about 6 seconds to
enter main menu until “0.-” appears on the display
then release the button.
Press UP till “2.-” appears on the display.
Press “SET” into the operating parameter setting
menu, digital displays “2.0”
Press UP till “2.1” appears on the display
Press SET to enter the door opening speed adjust
-
ment menu,
. 1
High speed, 100% of standard door opening
speed, 50% of soft closing speed
. 2
High speed, 90% of standard door opening spe-
ed, 40% of soft closing speed
. 3
Medium speed, 80% of standard door opening
speed, 50% of soft closing speed
SETTINGS OF FUNCTION PARAMETERS IN MENU
To Next Page
Loading...