60
SETTINGS OF FUNCTION PARAMETERS IN MENU
. 4
Low speed, 70% of standard door opening
speed,40% of soft closing speed
Note:
After quick setting the door drive,AAS function
automatically select the most optimized speed
for the door already.
When you change the speed manually in this
menu,you have to set the travel position limit
again to ensure door drive works properly.
2. 2
Soft closing distance
adjustment
2.2
Press and hold SET button for about 6 seconds to
enter main menu until “0.-” appears on the display
then release the button.
Press UP till “2.-” appears on the display.
Press “SET” into the operating parameter setting
menu, digital displays “2.0”
Press UP till “2.2” appears on the display
Press SET to enter the Soft closing distance adjust-
ment,
. 1
Soft closing distance
SL: 10CM HL: 20CM VL: 25CM
. 2
Soft closing distance
SL: 20CM HL: 30CM VL: 40CM
. 3
Soft closing distance
SL: 25CM HL: 45CM VL: 50CM
. 4
Soft closing distance
SL: 40CM HL: 55CM VL:60CM
Note:
The above soft closing distance is estimated
with 18-inch cable drum. The actual distance
will be dierent according to the customer's
cable drum diameter. The rail system (AAS)
will automatically match the optimized soft
closing distance. After the customer changes
the default distance, the previous travel limit
will be lost and needs to be re-learned.
To Next Page
Loading...