Starline S96v2 - Page 22

To set the parking heater activation before remote engine start, select the 18 item in the settings
menu. Then, using buttons
icon-short-2.png
Image not found or type unknown
and
icon-short-3.png
Image not found or type unknown
, set the desired value
0 or 1.
Description of configuration options:
0 — do not start parking heater;
1 — start parking heater before remote engine start.
Setting parking heater activation before automatic engine start
To set the parking heater activation before automatic engine start, select the 19 item in the
settings menu. Then, using buttons
icon-short-2.png
Image not found or type unknown
and
icon-short-3.png
Image not found or type unknown
, set the
desired value 0 or 1.
Description of configuration options:
0 — do not start parking heater;
1 — start parking heater before automatic engine start.
Setting temperature for parking heater activationbefore remote and automatic engine
start
To set the parking heater activationtemperature before remote and automatic engine start, select
the 20 item in the settings menu. Then, using buttons
icon-short-2.png
Image not found or type unknown
and
icon-short-3.png
Image not found or type unknown
, set the desired value from –5 to –30 ºС.
Setting temperature for automatic engine start
To set the temperature for automatic engine start, select the 21 item in the settings menu. Then,
using buttons
icon-short-2.png
Image not found or type unknown
and
icon-short-3.png
Image not found or type unknown
, set the desired value from +10 to
–40 ºС.
Setting 2-way remote key detection range
To set the remote key detection range, select the 22 item in the settings menu. Then, using
buttons
icon-short-2.png
Image not found or type unknown
and
icon-short-3.png
Image not found or type unknown
, set the desired value from 1 to 10. 1 –
min distance, 10 – max distance.
Remote Sound Profile Menu
The menu offers 4 sound profiles with settings for various types of remote signals: command
confirmation, alarm, and button press. Profile selection is done by pressing buttons on the remote.
The sound profile settings shown in the table are set by default.