Starline S96v2 - Page 23

№ Profile Name Button Combination Description
1 SOUND 2
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-1.png
Image not found or type unknown
Maximum volume with all
signals, vibration signal
enabled.
2 SOUND1
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-2.png
Image not found or type unknown
Minimum volume with all
signals, vibration signal
enabled.
3 SOUND 0
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-3.png
Image not found or type unknown
Vibration signal only, sound
volume disabled.
4 SOUND --
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-4.png
Image not found or type unknown
Silent mode, sound volume
and vibration signal
disabled.
Adjusting Sound Profile Settings:
Enter the menu by long press of the button
icon-long-3.png
Image not found or type unknown
icon-note-2.png
Image not found or type unknown
. After
entering, the current profile settings will be displayed.
Adjusting Command Confirmation Volume
image.png
Image not found or type unknown

image.png
Image not found or type unknown
1 — volume level of the selected signal type;
2 — number of the selected sound profile;
3 — indication of volume settings for command confirmation signals;
4 — vibration signal:
Сработал тревожныи уровень датчика удара.png
Image not found or type unknown
— on,
Датчик удара отключен.png
Image not found or type unknown
— off.
Volume adjustment is done by short pressing the buttons
icon-short-2.png
Image not found or type unknown
or
icon-short-3.png
Image not found or type unknown
, respectively. A short press of the button
icon-short-4.png
Image not found or type unknown
enables or
disables the vibration signal.
To switch to adjusting the next type of signal within the selected sound profile, press
icon-short-1.png
Image not found or type unknown
.
Adjusting Alarm Signal Volume
image.png
Image not found or type unknown
image.png
Image not found or type unknown
1 — Selected signal type volume level;
2 — Selected Sound Profile Number;
3 — Vibration Signal:
Сработал тревожныи уровень датчика удара.png
Image not found or type unknown
— on,
Датчик удара отключен.png
Image not found or type unknown