18. Turn on the ignition.
19. Press the transceiver button 5 times. Turn off the ignition.
20. The transceiver LED will flash once.
21. Turn on the ignition.
22. Press the transceiver button 4 times. Turn off the ignition.
23. The transceiver LED will flash twice.
24. Turn on the ignition.
25. Press the transceiver button 6 times. Turn off the ignition.
26. The transceiver LED will flash three times.
27. Press the transceiver button 3 times. Turn off the ignition.
28. The transceiver LED will flash four times.
29. Two flashes of the transceiver LED and 2 beep sounds will confirm the acceptance of the
new emergency disarm code.
30. Turn on the ignition.
31. Press the transceiver button 5 times. Turn off the ignition.
32. The transceiver LED will flash once.
33. Turn on the ignition.
34. Press the transceiver button 4 times. Turn off the ignition.
35. The transceiver LED will flash twice.
36. Turn on the ignition.
37. Press the transceiver button 6 times. Turn off the ignition.
38. The transceiver LED will flash three times.
39. Press the transceiver button 3 times. Turn off the ignition.
40. The transceiver LED will flash four times.
41. Two flashes of the transceiver LED and 2 beep sounds will confirm the recording of the
new emergency disarm code.
To Next Page
Loading...
