8.3.4 Varying with dierent accompaniment patterns
1. Press the [STYLE] button and select a style.
2. Press the [CHORD] button to turn on the chord recognition mode and press the
[SYNC START] button.
3. Press the [FILL A] button.
4. Press the [INTRO/ENDING] button. The ‘A’ symbol ashes on the display. This
indicates that the intro is ready to start.
5. Auto accompaniment starts as soon as you play a chord with your left hand. If
the intro is nished, the auto accompaniment ows seamlessly into main part
A.
6. Press the [FILL B] button.
A ll part is inserted, that ows seamlessly into main part B.
7. Press the [INTRO/ENDING] button to conclude the song with an ending. The
style stops after the ending.
If you hold the [FILL A] or [FILL B] button pressed while a style is being
played, the selected ll pattern is played until you release the key.
8.3.5 Tempo
1. Each style of the instrument is programmed with a preset default tempo, but
you can change it using the [TEMPO+] and [TEMPO–] buttons.
2. If you press the [TEMPO+]/[TEMPO–] buttons simultaneously, the tempo is reset
to the factory default setting.
8.3.6 Fade
1. FADE IN
Press the [FADE IN/OUT] button while no style is being played.
When the style begins to play, the style volume is increased slowly from 0 to
the normal volume.
2. FADE OUT
Press the [FADE IN/OUT] button while a style is being played. The style volume
is slowly decreased from normal volume to 0. Then the style playback is
stopped.
Functions
20
MK-300
Keyboard
To Next Page
Loading...