Startone MK-300 - Touch sensitivity

To Next Page

To Previous Page

8.4.7 Vibrato eect

The vibrato eect modulates the tones played on the keyboard.

1. Press the [FUNCTION] button to select the setting for the vibrato eect. The

current setting appears on the display.

2. Press the [+] or [–] buttons to turn the vibrato eect on or o.

The vibrato eect does not aect the percussion voices.

8.4.8 Touch sensitivity

With this function you can adjust the touch response of the keyboard at four dif‐

ferent levels.

Parameter Meaning

‘OFF’ Touch sensitivity is o. This can be very useful when playing the

organ voice.

‘001’ Soft

In this setting, the volume is higher than usual even when playing

with a soft touch.

‘002’ Normal

This setting corresponds to the usual touch response of a key‐

board.

‘003’ Hard

In this setting, the volume is lower than usual even when playing

with a hard touch.

1. Press the [FUNCTION] button until the display shows the setting ‘TOUCH’ .

Use the [ +] or [–] buttons to adjust the touch sensitivity.

2. If you select ‘OFF’ , touch sensitivity is disabled.

8.4.9 Beats

With this function you can set the beats in a range from 0 to 9.

1. Press the [FUNCTION] button to select the setting for the beats. The display

shows the current ‘XXX Beat’ setting.

2. Use the number buttons and the [ +] or [–] buttons to adjust the beats.

Functions

MK-300

Keyboard