Incident message Description Type
The boost
converter has a
wrong HW version
The inverter cannot identify an internal component, or it does
not match the other components. The inverter cannot inject
into the grid.
u
Notify your installer.
The boost
converter is
defective
The boost converter is defective, the inverter is not injecting
into the grid or is injecting at reduced power.
u
Notify your installer.
Time/date lost
The inverter lost the time because it remained unconnected
from the grid for too long a time. Yield data cannot be stored,
incident messages only with incorrect date.
u
Correct the time under Settings u Date/time.
EN
747,431 | Z09 | 2015-09-30
68
To Next Page
Loading...
