STIEBEL ELTRON WPF 5 basic

INSTALLATION
Settings
42 | WPF basic www.stiebel-eltron.com
12. Settings
12.1 Standard settings
At the factory, the heat pump manager is programmed with the
following standard settings:
Switching times for heating circuit 1 and 2 (day mode)
Only the first switching time pair is preprogrammed.
Standard Setting range
Monday - Friday 6:00 - 22:00 00:00 – 23:59
Saturday - Sunday 07:00 – 23:00 00:00 – 23:59
Room temperature 1 and 2
Standard settings are without night setback.
Room temperature in day mode 20 °C 5 – 30 °C
Room temperature in night mode 20 °C 5 – 30 °C
DHW program switching times
Monday - Sunday 0:00 – 24:00 00:00 – 23:59
DHW temperature
DHW day temperature 47 °C 10 – 60 °C
DHW night temperature 10 °C 10 – 60 °C
Heating curve slope
Heating curve 1 0,6 0 - 3
Heating curve 2 0,2 0 - 3
12.2 Heating and DHW programs
You may enter your individual programs into the following tables.
12.2.1 Heating program, heating circuit 1
Switching time
pair I
Switching time
pair II
Switching time
pair III
Mo
Tu
We
Th
Fr
Sa
Su
Mo - Fr
Sa - Su
Mo - Su
12.2.2 Heating program, heating circuit 2
Switching time
pair I
Switching time
pair II
Switching time
pair III
Mo
Tu
We
Th
Fr
Sa
Su
Mo - Fr
Sa - Su
Mo - Su
12.2.3 DHW program
Switching time
pair I
Switching time
pair II
Switching time
pair III
Mo
Tu
We
Th
Fr
Sa
Su
Mo - Fr
Sa - Su
Mo - Su
12.3 Appliance handover
Explain the function of the appliance to users and familiarise them
with its operation.
Note
Hand over these operating and installation instructions
to the user for safe-keeping. All information in these
instructions must be closely observed. The instructions
provide information on safety, operation, installation and
maintenance of the appliance.