Stihl FS 45 Manual

•
Takeoutthescrews.
-Removethespacerflangewith
tensioner.
•
Removethegasket.
-Unscrewthesparkplug
andfitthelockingstrip
42218935900.
•
Unscrewthestartercupfromthe
crankshaft.
Assembleinthereversesequence.
-Fitnewgaskets.
•
Insertcarburetormounting
screwsinthespacerflange.
-Tightenscrewstospecified
torque-see3.5.
-Secureterminalforground
wiretoupperignition
modulemountingscrew.
-Adjustignitionmodule
(airgap),see6.1.
Troubleshootingchart-see
"StandardRepairs,Trouble-
shooting"handbook.
-Removethestartercup-
see7.2.1.
Sparkarrestingscreen
•
Unscrewstubwithspark
arrestingscreen.
-Cleanthesparkarresting
screen,
installanewstubifnecessary.
-Cleanthethreadonthestuband
coatwithsealant-see11.2.
Important:Followmanufacturer’s
instructions.
-Fitthestubandtightendownto
15Nm(11lbf.ft).
5.2 ExhaustMuffler/
SparkArrestingScreen
VA
232RA026
VA
232RA029
VA
232RA027
VA
232RA030
VA
232RA028
FS45 9

Stihl FS 45 Specifications

General

Engine Displacement	27.2 cc
Power Output	0.75 kW
Cutting Diameter	380 mm
Engine Type	2-stroke
Shaft Type	Curved
Fuel Capacity	0.33 liters
Fuel Tank Capacity	0.33 liters
Cutting Width	380 mm
Engine Power	1.0 bhp
Vibration Levels Left/Right Handle	5.5/5.5 m/s²