117MS 201, MS 201 C, MS 201 T, MS 201 TC
: Pull off the fuel hose (1) and fuel
return hose (2).
– Check the fuel pump and replace
if necessary.
– Replace the fuel hose and fuel
return hose.
Installing
: Push the new fuel return hose (1)
onto the long nipple (2) so that
the flange locates against the tab
(arrow).
7013RA420 TG
1
2
7013RA421 TG
1
2
: Push the new fuel hose (1) onto
the short nipple (2) so that the
flange locates against the fuel
return hose (arrow).
The fuel hoses must be pushed fully
home.
: Position the fuel pump (1) so that
its lug (2) engages the recess
(arrow).
: Push the fuel pump (1) into its
seat until the tabs snap into
position.
7013RA422 TG
2
1
7013RA423 TG
2
1
– Thread the fuel return hose (1)
and fuel hose (2) through the
opening (arrow).
: Fit the fuel return hose (1) so that
its groove is properly seated in
the opening (arrow).
7013RA424 TG
2
1
7013RA425 TG
1
To Next Page
Loading...
Need help?
General
