58 MS 201, MS 201 C, MS 201 T, MS 201 TC
Machine runs trouble-free,
no further action necessary
no
Replace ignition
module,
b 7.2
yes
no
– Look for fault in fuel system or
carburetor
– Check engine for leaks
– Check position of flywheel on
crankshaft,
b 6.2, b 7.5
yes
Check operation
of stop switch:
– Short circuit wire chafed?
– Function between contact spring and switch
shaft contact:
– Position "
F" = no connection
– Position "
0" = connection
– replace the wiring harness if necessary,
b 7.6.2
2
3
Powerful
spark?
Engine
runs?
To Next Page
Loading...
Need help?
General
