EasyManuals Logo

Stihl Msa 200 c User Manual

Stihl Msa 200 c
Go to English
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
MSA 200 C
English
90
Troubleshooting
Always remove the battery from the machine before starting any work on the machine.
Fault Cause Remedy
Machine does not start when switched on
No electrical contact between machine
and battery
Remove battery, visually inspect the
contacts and reinsert the battery
Battery discharged
(1 LED on battery flashes green)
Charging a battery
Battery too hot / too cold
(1 LED on battery is red)
Let the battery cool off / let the battery
warm up gradually at temperatures of
approx. 15 °C - 20 °C
Battery fault
(4 LEDs on battery flash red)
Remove battery from the machine and
reinsert it. Turn on the machine – if the
LEDs still flash, the battery is faulty and
must be replaced
Unit too hot
(3 LEDs on battery are red)
Let the machine cool off
Electromagnetic malfunction or fault in
machine
(3 LEDs on battery flash red)
Remove battery from the machine and
reinsert it. Turn on machine if the LEDs
still flash, the machine is faulty and must
be checked by a servicing dealer
1)
Moisture in the machine and/or battery Let the machine/battery dry
Machine switches off in operation
Battery or machine electronics too hot Remove battery from the machine, let
battery and machine cool off
Electrical or electromagnetic malfunction Remove battery and reinsert it

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl Msa 200 c and is the answer not in the manual?

Stihl Msa 200 c Specifications

General IconGeneral
Battery TypeLithium-Ion
Voltage36 V
Power SourceBattery
Chain Gauge0.043 in (1.1 mm)
Chain Pitch1/4 inch
Vibration Level (Front Handle)2.5 m/s^2
Bar Length12-14 in. (30-35 cm)

Related product manuals