EasyManua.ls Logo

Still EXV 10 Basic - Battery Replacement Procedures

Still EXV 10 Basic
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
The weight and size of the battery influence the sta-
bility of the truck.
The new battery must comply with the weight shown
on the truck identification plate. Install the battery
precisely and in accordance with technical regula-
tions.
CAUTION
Be careful not to damage any wiring when replacing
the battery.
Preparation
Maintenance personnel
The battery may only be changed by specially
trained personnel, in accordance with the
manufacturer's instructions for the battery, the
battery charger and the truck. The mainte-
nance instructions for the battery must be ob-
served.
Fire prevention measures
WARNING
Do not smoke or use a naked flame
when handling batteries. In the area des-
ignated for parking the truck to recharge
the battery or battery charger, there
should be no flammable materials or
substances that can cause sparks within
a radius of at least 2 metres. The charg-
ing area must be well ventilated. Keep a
fire extinguisher at hand.
Safe parking
Park the truck securely before carrying out
work on the battery. The truck can only be op-
erated when the battery cover is closed and
the battery outlet is inserted. If the truck is en-
abled for side removal of the battery, the truck
can only be operated once the battery is fixed
in place properly using the battery locking sys-
tem.
Use
4
Charging the battery
98 45728043478 EN - 11/2021 - 09

Table of Contents

Related product manuals