Drive
– Turn the switch key to the
Tortoise
posi-
tion (gentle acceleration and deceleration)
or the
Hare
position (strong acceleration
and deceleration) as required.
– Hold one of the tiller handles (1) on one
side.
– Lower the tiller.
NOTE
The truck is only in the drive position in the (B)
zone. In the lower (A) zone or the upper (C)
zone, the mechanical brake is applied and the
traction motor is switched off.
NOTE
For details on driving a truck equipped with
the "OptiSpeed" option, see [Querverweisfeh-
ler: Ziel mit ID='Fahren_Option' nicht gefun-
den!]
NOTE
One of the travel throttles (2) or (3) on the tiller
can be operated with the right or left hand. Al-
ways operate the travel throttle slowly, as the
truck responds instantly. Abrupt starting or
braking or reversing the direction of travel
should be avoided at all costs.
Forward travel
– Use your thumb to press on the bottom part
of the throttle.
– The speed increases with the movement of
the throttle. The speed is limited to 4 or
6 km/h depending on the position of the
key.
0252_003-029
5˚
A
B
C
Use
4
Driving
7345728043478 EN - 11/2021 - 09
To Next Page
Loading...
