Using the truck on the loading bridge
and inside a container
DANGER
Risk of accident
Before driving on to a loading bridge, the operator
must check that the bridge has been properly assem-
bled and secured, and that it has sufficient load ca-
pacity.
You must drive onto the loading bridge slowly and
carefully.
The operator must check that the vehicle to be loa-
ded or unloaded is sufficiently secure so that it will
not move and that it is suitable to support the stress
created by the truck.
The lorry driver and the forklift operator must agree
on the time of departure of the lorry.
Towing trailers
The forklift is not qualified to tow trailers.
Use
4
Moving the load
9345728043478 EN - 11/2021 - 09
To Next Page
Loading...
Need help?
General
