approximately 500 mm above the ground.
(only available on 1400 kg version)
DANGER
If you notice any malfunctions or if you have any
doubts about the correct operation of the truck, DO
NOT use the truck, but call the manufacturer's au-
thorised service network.
Checking the anti-crush safety
device
Anti-crush safety function
The truck moves in reverse when the anti-
crush button (2) is pressed.
If the truck is being operated in narrow areas
such as a lift, for example, the operator may
hit the wall if care is not taken. The operator
would be injured by the tiller if this occurred
and the truck was not fitted with an anti-crush
device.
The truck automatically shifts into reverse
when the anti-crush device on the tiller head
comes into contact with the driver's body.
When the operator moves away from the anti-
crush device, the vehicle stops, even if for-
ward travel is selected again.
Normal operation may be resumed after re-
leasing the throttles.
Checking the anti-crush safety device
WARNING
Ensure that the test area is free of people and ob-
jects, both in front of and behind the truck.
– Operate the throttle (1) or (3) for forward
travel.
The truck moves forward.
– Activate the anti-crush safety device (2).
WARNING
The truck stops and shifts into fast reverse.
0203_003-010
2
3
1
Use
4
Checks and operations prior to use
62 45728043478 EN - 11/2021 - 09
To Next Page
Loading...
