●
Damaged or missing decals must be re-
placed in compliance with the marking posi-
tion table.
●
The roller guide rails must be coated in a
visible layer of grease.
●
Check that the wheels (traction, load) are in
good condition. The wheels must not show
any sign of damage or heavy wear. They
must be correctly attached.
●
Check that there are no objects, twine, etc.
blocking the operation of the wheels and
rollers (4).
●
Make sure the horn works correctly.
●
The battery cover (6) must be securely
closed.
●
Make sure the cover is (3) present and
properly secured.
●
Check that the chains (1) are undamaged
and evenly and adequately tensioned.
●
Visually check that the various parts of the
truck are in good condition and correctly
positioned;
●
Make sure that the anti-crush safety push-
button works correctly;
●
Check that the buttons and throttle/s on the
tiller are working correctly;
●
Make sure that the buttons and throttle au-
tomatically return to their correct position af-
ter release
●
Check that the battery plug/outlet are cor-
rectly positioned and intact;
●
Make sure that the start/stop key works cor-
rectly
●
Check that the truck brakes and stops when
the throttle is released;
●
Check that the truck brakes and stops when
the tiller is released;
●
Make sure that the electromagnetic brake
works effectively;
●
Check the automatic return of the tiller to
the vertical position with relative emergency
braking;
●
Check the battery electrolyte level and den-
sity as indicated in the battery instructions;
●
Check that the battery wiring is intact;
●
Check that the battery lock system is oper-
ating correctly (only for trucks designed for
side removal of the battery). Check that the
battery is locked in place.
●
Check the correct operation of the automat-
ic speed reduction system with forks raised
Use
4
Checks and operations prior to use
6145728043478 EN - 11/2021 - 09
To Next Page
Loading...
