Checks and operations prior to use
List of checks prior to start-up
WARNING
Damage or other faults on the truck or attachments
(special equipment) can result in accidents.
If damage or other faults are noticed on the truck or
attachments (special equipment) during the following
inspections, do not use the truck until it has been
properly repaired. Do not remove or disable the safe-
ty systems and switches. Do not change the pre-set
values.
CAUTION
Only use the truck if all of the covers are fitted cor-
rectly and the covers and doors are closed correctly.
CAUTION
Perform checks on a flat surface. Make sure that
there are no people or objects in the test zone in
front of and/or behind the truck.
CAUTION
Drive very slowly during the operational tests.
Ensure that the truck is in good working condi-
tion prior to start-up. These checks supple-
ment and do not replace the scheduled main-
tenance operations
●
Check the area under the forklift truck for
leaking consumables.
●
Check the condition of the forks(5) and oth-
er load-carrying equipment to ensure they
show no noticeable damage (e.g. bends,
cracks, significant wear).
●
Check that the uncovered sections of hy-
draulic pipes and hoses are in good condi-
tion and check them for leaks.
●
The guard mesh or plastic screen (2) must
be intact and properly secured.
●
Do not restrict the field of vision. Ensure the
visible areas specified by the manufacturer
are observed.
●
Attachment parts (special equipment) must
be properly secured and function according
to their operating instructions.
0252_003-068
11
2
3
4
5
6
Use
4
Checks and operations prior to use
60 45728043478 EN - 11/2021 - 09
To Next Page
Loading...
