Reversing the direction of travel
Reverse direction without a load on the
forks
●
To reverse direction when travelling without
a load on the forks, turn the drive control
throttle in the opposite direction to the direc-
tion of travel. The truck will stop with ener-
getic but gradual braking and will start to
move again in the opposite direction.
Reverse direction with a load on the
forks
●
To reverse direction with a load on the
forks, put the drive control throttle in the
neutral position and wait for the truck to
stop.
●
Then turn the drive control throttle in the op-
posite direction of travel to the previous
one.
CAUTION
The operator must regulate the travel control by
adapting truck braking to the type of load being car-
ried in order to avoid losing the load.
Use
4
Driving
76 45728043478 EN - 11/2021 - 09
To Next Page
Loading...
