speed of travel of the truck increases in line
with the angle of the throttle (4).
●
Release the button (3) to disable this func-
tion.
NOTE
If the activation sequence is accidentally re-
versed, i.e. with the tiller in the vertical posi-
tion, the throttle (4) is turned first and then the
button (3) is pressed:
●
The truck will move in creep speed as ex-
pected in the direction of the forks
●
Travel in the direction of the operator is not
enabled.
Use
4
Driving
7545728043478 EN - 11/2021 - 09
To Next Page
Loading...
