Authorised and safe use
Intended use of the trucks
CAUTION
This machine is intended for the transport of loads
packed on pallets or in industrial containers designed
for this purpose, as well as for placing pallets into
and removing pallets from stock.
The dimensions and capacity of the pallets or con-
tainers must be adapted to the load being transpor-
ted to ensure stability.
The table of characteristics and performance attach-
ed to this user manual gives you some of the infor-
mation you need to check that the equipment is suit-
able for the work being carried out.
Any specific usage must be authorised by the site
manager; an analysis of the potential risks associ-
ated with this usage will enable him to put in place
any necessary additional safety measures.
Safety instructions relating to
use of the truck
Behaviour when driving
The operator must obey the same rules within
the plant as on the road. The operator must
drive at a speed appropriate for the driving
conditions. For example, the operator should
drive slowly around corners, when entering
and travelling through narrow passageways,
when driving through swing doors, at blind
spots, or on uneven surfaces. The operator
must always maintain a safe braking distance
from vehicles and persons in front of him and
must always have the truck under control. The
operator must avoid sudden stops, making
fast U-turns and overtaking other vehicles in
potentially dangerous areas or areas with poor
visibility.
WARNING
Driving the truck while sitting down is prohibited.
Use
4
Authorised and safe use
54 45728043478 EN - 11/2021 - 09
To Next Page
Loading...
Need help?
General
