Still LTX 80 - Checking the Condition and Operation of the Signal Lights

Checking the condition and opera-
tion of the signal lights
The condition and operation of the signal
lights must be checked regularly.
– Check the two road lights located at the
front
Check that the lamp lenses are clean and are
not broken, and that the lights work.
Incorrect adjustment of the road lights will re-
sult in reduced field of vision to the front and
will risk dazzling other users.
– Check the direction indicator lights located
on the front and rear
If the direction indicator lights are adjusted in-
correctly, other users may not know that you
want to change direction.
– Check the brake lights located at the rear
Incorrectly functioning brake lights are detri-
mental to your safety and that of third parties.
You could cause an accident.
DANGER
Risk of accident
Never use the tow tractor if the brake lights are faul-
ty.
– Replace the bulbs in the event of failure
WARNING
Risk of burns
Do not touch the headlights, particularly the main
beam headlights, during and after operation.
– Replace the lights if they are broken

Maintenance
5
Chassis, bodywork and fittings
1351191 801 15 51 EN - 02/2021 - 10