Still LTX 80 - Checking the Battery Charge Status; Checking the Interlocks

Checking the battery charge status
– Pull the emergency stop button(2).
– Switch on the ignition using the key (3). For
trucks with digicodes, turn the start-up but-
ton to position 1, then enter the PIN code
into the digicode keypad.
– Check the battery charge status on the driv-
er display (1).
CAUTION
Batteries that are discharged to under 20% of rated
capacity are over-discharged. Over-discharging
shortens the service life of the batteries and could
render the battery warranty void.
Never leave batteries in a discharged state.
Checking the interlocks
DANGER
For your own safety, and the safety of third parties,
the tow tractor and the carrier are fitted with various
interlocks.
It is imperative that these interlocks function correct-
ly.
Before each shift, check that all the interlocks
for the tow tractor work correctly and are safe.
– Check that the key switch or turning knob
works correctly
– Check that the emergency off switches
work correctly
– Check that the forklift operator detection
system is working correctly, including on the
seat
– Check that the battery locking system is op-
erating correctly
NOTE
For any attachments, additional interlocks may
be fitted. Also check that these additional in-
terlocks are operating correctly.

Use
4
Checks and actions prior to commissioning
351191 801 15 51 EN - 02/2021 - 10