EasyManua.ls Logo

Still LTX 80 - Emergency Stop; Operating Blue Q Mode

Still LTX 80
186 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emergency stop
During normal operation, the emergency
stop button (1) must be pulled out.
In the event of danger, push the emergency
stop button (1) to break the electrical circuit
and immobilise the tow tractor.
Operating Blue Q mode
With efficiency mode, called Blue Q, you can
save battery power. This mode decreases the
performance (speed, acceleration) of the tow
tractor or carrier.
It is possible to choose between three levels
of Blue Q modes:
Standard mode: Blue Q mode is switched
off when the tow tractor is returned to serv-
ice. To activate efficiency mode, the driver
can press the Blue Q button at any time
Fixed mode: Blue Q mode is continuously lit
when the tow tractor is returned to service
and during operation The driver cannot
switch Blue Q mode off
Fixed-flex mode: Blue Q mode is switched
on To activate efficiency mode, the driver
can press the Blue Q button at any time
Only After-Sales Service can change the
mode choice that has been selected. Standard
mode is activated by default.
To activate Blue Q mode, proceed as follows:
Press the Blue Q (1) button
The Blue Q symbol is shown on the display
next to the drive programme number.
Use
4
Driving the tow tractor
56 1191 801 15 51 EN - 02/2021 - 10

Table of Contents

Related product manuals