Seat belt (optional)
Fastening the seat belt (if fitted)
NOTE
Sit as far back as possible so that your back is
leaning against the seat backrest. The auto-
matic blocking mechanism permits sufficient
freedom of movement on the seat.
– Pull the seat belt (1) out of the belt retractor
without jerking, and adjust to the size of the
operator.
– Click the tongue into the buckle.
– Check the tension of the seat belt. It should
be close to the body.
Unfastening the seat belt (if fitted)
– Push the red button (2) on the buckle (1).
– Slowly guide the belt tongue back into the
retractor by hand.
Use
4
Driver's compartment settings
471191 801 15 51 EN - 02/2021 - 10
To Next Page
Loading...
