EasyManua.ls Logo

Still LTX 80 - Checking the braking system

Still LTX 80
186 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking and lubricating the auto-
matic tow coupling
WARNING
Risk of crushing
Do not reach into the open coupling with your
hands or arms. It may close.
Lubricate the automatic coupling locking
mechanism.
For tow tractors equipped with a coupling that
can be controlled remotely:
Tighten the mounting screws on the re-
motely unlockable tow coupling.
Ensure that all the safety locking pins are
mounted correctly.
Checking the braking system
DANGER
Increased risk of accident if the braking system is
faulty
Never drive a tow tractor with a faulty braking sys-
tem
If the braking system is faulty, park the tow tractor
safely. Inform a manager immediately so that the
fault can be rectified
DANGER
Increased risk of accident following a failure in the
braking system
Never use the tow tractor if the brake fluid level is
low
Fill the brake fluid reservoir immediately and
check the braking system for leaks
Look for corrosion and damage to the brake
pipes and check for leaks
Check for leaks on the front brake calipers
Check for leaks on the slave cylinder on the
rear axle
Maintenance
5
Chassis, bodywork and fittings
1371191 801 15 51 EN - 02/2021 - 10

Table of Contents

Related product manuals