Checking the drive axle suspension
bushes
– Park the tow tractor safely.
– Switch off the ignition and remove the key.
– Press the emergency off switch.
– Open the battery compartment door.
– Disconnect the battery connector.
– Remove the cover.
– Check the drive axle suspension bushes for
condition and wear.
If wear is evident, please contact the after-
sales service department.
– Refit the cover.
– Reconnect the battery connector.
– Close the battery compartment door.
– Return the tow tractor to service.
Maintaining the Liftrunner system
equipment
For this optional equipment, certain checks
must be performed.
Only authorised technicians may work on this
equipment.
Maintenance
5
Chassis
1471191 801 15 51 EN - 02/2021 - 10
To Next Page
