Lighting
Using the signal lights
WARNING
Risk of accident
If the truck must be used outdoors at night, it must be
equipped with headlights.
We recommend switching off the main beam head-
lights when the truck is at a standstill.
Headlights are available as an option. They al-
low you to use the tow tractor and carrier in
poorly lit areas.
Turn off the main beam headlights when the
forklift operator leaves the truck.
Check the condition of the signal lights. Report
any faults identified to your manager.
WARNING
Risk of burns
Do not touch the headlights, particularly the main
beam headlights, during and after operation.
Using the lights
– Press the signalling lights button (1) located
on the display once.
The sidelights illuminate.
– Press the signalling lights button (1) located
on the display again.
The main beam headlights illuminate.
– Press the signalling lights button (1) located
on the display a third time.
The signalling lights are switched off.
Use
4
Lighting
68 1191 801 15 51 EN - 02/2021 - 10
To Next Page
Loading...
