Stinger HEIGH10+ - Audio Settings; Equalizer; Crossover; Factory EQ

®
®
stingersolutions.com
stingersolutions.com
38
39
1. Reset
Press to set balance and fade to
zero.
2. Balance
Using left/right arrows, adjust
speaker balance left/right. You
can also drag the set point to the
desired fade & balance.
3. Fader
Using up/down arrows, adjust
speaker fade front/rear
4. Battery Voltage
Shows current battery voltage.
5. Loudness
When ON, boosts +3db for
frequencies between 100Hz &
2000Hz
6. Subwoofer
Turns subwoofer output ON/OFF.
7. Phase
Changes phase of subwoofer
signal.
8. Subwoofer Level
Use left/right arrows or drag slider
to adjust volume level of subwoofer.
Press the HOME BUTTON > Audio Settings > Balance to select the Balance/
General Audio Settings
BALANCE / GENERAL AUDIO SETTINGS
1
2
3
4
5
6
7
8
Press the HOME BUTTON > Audio Settings to access IX210 Audio Settings.
1. Balance & General Settings
Adjust Fade, Balance, Loudness,
and Subwoofer settings quickly
from this menu.
2. Equalizer
15 band graphic equalizer with
multiple customizable preset slots.
3. Crossover
Internal electronic variable
crossover with 6 customizable
preset slots.
4. Time Correction
Compensate for uneven distances
between speakers and listener.
5. Factory EQ
Quickly set popular equalizer
settings for a variety of Genres.
6. Advanced Audio Settings
Defeat, Source Volume and Source
Gain Settings
AUDIO SETTINGS
1 2 3 4 5 6