48
Controls in detail
Journey with ferry or train
To register activity during a ferry or a train
journey the ferry/train mode must be
manually activated before the journey
begins.
Activate ferry/train mode
왘 Show the main menu display by pressing
the button.
(컄 VU main menu display‚ page 17)
왘 If not already shown, select menu
OUT
using the or button.
왘 Press the button.
왘 Select activity using
the or button.
왘 Press the button.
Ferry/train mode is activated. This can
be seen only at the standard display.
왘 Press the button to return to the
standard display. The ferry/train
symbol is in the position for activity.
(컄 VU standard display‚ page 16)
Deactivate ferry/train mode
The ferry/train mode cannot be manually
deactivated. However it will be automatically
deactivated when you do either of:
앫 Start driving.
앫 Activate Out of scope mode.
When the Ferry/train mode is deactivated
the ferry/train symbol is no longer in the
position for activity at the standard display.
(컄 VU standard display‚ page 16).
Enter before journey
L
앫 Activation is only possible when the
vehicle is stationary.
앫 When on board a ferry or a train the
vehicle does not move and the speed
sensor thereby cannot record any ac-
tivity.
OUT/
OUT of scope
Out of Scope OUT
or Ferry
To Next Page
Loading...
