49
Controls in detail
Journey where no recording is required
If you are using the vehicle in conditions
where the EU tachograph regulation 3820/
85 does not apply, then recording of these
activities is not required. This situation is
called to drive “Out of scope”.
Out of scope driving could be, for example:
앫 Driving a vehicle that is only partly load-
ed in respect of weight, so that the vehi-
cle gross weight does not exceed the
limit at which a tachograph is required.
앫 Driving in a country outside EU.
앫 Driving on a non public road, for exam-
ple driving in a gravel pit or off road.
Activate out of scope mode
왘 Show the main menu display by pressing
the button.
(컄 VU main menu display‚ page 17)
왘 If not already shown, select menu
OUT
using the or button.
왘 Press the button.
왘 Select activity
OUT
using
the or button.
왘 Press the button.
Out of scope mode is activated. This can
be seen only at the standard display.
왘 Press the button to return to the
standard display. The Out of scope
symbol
OUT
is in the position for
activity.
(컄 VU standard display‚ page 16)
Driving out of scope
L
Drivers are responsible for ensuring that
they obey driving laws in
respective country.
OUT/
OUT of scope
Out of Scope OUT
or Ferry
To Next Page
Loading...
Need help?
General
