72
Displays and data
Messages, warnings and malfunctions
>> Over
speeding
Warning - - - The vehicle speed has for 1
minute exceeded the over
speed limit set and will be
stored.
왘 Observe the specified speed limit.
>> Overspeeding
pre-warning
Message - - - 앫 The current speed of the
vehicle is exceeding the
over speed limit set.
앫 After 1 minute of continu-
ous over speeding the
event will be stored.
왘 Observe the specified speed limit.
! Power supply
interruption
Warning VU The VU supply voltage is be-
low the minimum limit or
above the maximum limit for
the correct operation of the
VU.
왘 Visit a specialist workshop for
tachographs if the reason for the
message is unknown.
Printer
high temperature
Message Printer The printing could not start
because the temperature of
the printer is out of allowed
range.
왘 Lower the temperature in the vehi-
cle interior.
왘 If the printer still fails, visit a spe-
cialist workshop for tachographs
to have the equipment checked.
Display Type Unit Description Action
To Next Page
Loading...
