Alarm Config
This page is for advanced users only, and allows the DVR to be
connected to a building alarm system to provide automatic activation
when the DVR's own alarm (e.g. motion detection) is triggered.
Due to the nature of connected alarms all being configured differently,
we cannot provide support on this feature.
Network Config
This page allows you to attach a DDNS account to the CCTV DVR for
remote access across the Internet.
For more information, please refer to these sections:
5.5 – Network
Serial Config
The functions in this section are not applicable to this model, as the
cameras do not support PTZ.
For more information, please refer to these sections:
5.8 – PTZ
To Next Page
Loading...