Storage Options CCTV SECURITY SYSTEM - 3.2 - Connecting Cameras to the DVR; 3.3 - Connecting the DVR to a Monitor

Page 9
3.2 – Connecting Cameras to the DVR
Each of the four cameras connects directly to the DVR via
the DB25 interface cable.
Black BNC: 4x video input – connect to cameras
Yellow BNC: 1x video output to BNC monitor
Red RCA: 1x audio output (not applicable)
White RCA: 4x audio input (not applicable)
Connect a camera to each of the four black BNC cables
and securely attach the DB25 cable to the DB25
connection on the back of the DVR, as shown below.
3.3 – Connecting the DVR to a Monitor
The DVR supports any VGA monitor with resolution of 800x600, 1024x768 or 1280x1024. Please connect the
monitor to the VGA port on the back of the unit.
In addition to a VGA monitor, the DVR also supports a secondary monitor output via the yellow BNC connection on
the DB25 cable (see above).
DB25
VGA