Site Preparation Guide Site Preparation Tasks
Page 9
LAN Requirements
If utilizing a LAN connection for communication and file transfer functions, the LAN connection
is a 100 base T, Ethernet protocol, RJ45 connector. One 4.57 m (15 foot) CAT6, 10/100 base T
cable is supplied with the printer, located in the Welcome Kit. The printer will function in either
DHCP or Static IP configurations.
Figure 5: LAN Connection Location
Workstation Requirements
For GrabCAD Print workstation requirements please visit:
http://help.grabcad.com/article/195-system-requirements-for-grabcad-print.
For Insight workstation requirements please visit the Stratasys website.
RJ45 Lan Cable Connection
To Next Page
Loading...
